Finally after years of waiting came to replace the batteries on most motorcycle intercom, series-Cardo Scala Rider-

In consideration Scala Rider G4 Scala Rider G9 and G9X

Commercial Product, fully compatible with the original product.

Voltage 3,7 / 4,0 V 800mAh chip with charge controller

ART. 452050PC-1S2P

Replacing the battery on the models G4 G9 G9X does not present too many problems, in fact very easy to be carried out.

Procedure: Level of difficulty from 1 to 10-5

What you need: a Torx T6 screwdriver, 2 cm double-sided.

Battery Cardo Scala Rider G4 G9 G9X

Remove from the scala rider G4/G9 with 5 screwsthe Torx screwdriver.

Cardo scala rider G4/G9 removals screws

Remove the connector from the base of the scala rider g4/g9

Cardo scala rider G4 G9 battery pack

Insert the connector of the new battery.

Apply scriscia of double-sided adhesive on the battery (as in the original)

scale batteries Raider G4 G9

When reassembling the two shells, pay attention to the gasket.

to mount the antenna spring, position it as closed and put it in place.

Tighten the screws, making sure they both have a different length.

Put charging the device.